FW: AR55 Metal Bookshelf Test Result

 

 

From: Nordic ID Support <support@nordicid.com>
Sent: Friday, December 23, 2016 8:36 PM
To: Jin <jin@intensecomp.com>
Subject: RE: AR55 Metal Bookshelf Test Result

 

Hi Jin,

 

Thank you for the test result. As you can see from the attached picture, you can not read tags reliably because the metal shelf blocks RFID signal. So do not use metal shelves if possible. Attach the tags vertically, and as close as possible to the spine of the book. Use tags based on the R6 chip because your tags are very close to each other. It’s also good to retune your antennas and enable AutoTune feature to improve reading performance. Note also that if you have a foil-coated paper on the book, then you have to use the on-metal tag.

 

If you have any further questions, please don’t hesitate to contact us.

Best Regards,
Turo Rantanen  |  Technical Support Engineer

Nordic ID  |  Myllyojankatu 2 A  |  FI-24100 Salo  |  Finland  |  Office +358 2 727 7700
Support +358 2 727 7790  | Direct +358 40 838 0284  |  Skype turo.rantanen@nordicid.com
http://www.nordicid.com  |  RFID Arena  |  Facebook  |  Twitter  |  YouTube

 

From: Jin [mailto:jin@intensecomp.com]
Sent: Wednesday, December 21, 2016 10:05 AM
To: Nordic ID Support <support@nordicid.com>
Subject: AR55 Metal Bookshelf Test Result

 

Hi Support,

 

I would like to share my test result and need some advice from you. Please see attachment file.

 

Regards,

Jin

Intensecomp